next »

[OscarHS]

Here again guys,

LAST UPDATE (19/06/08 GT+2 12:13 PM)= Added the A3P125 .DAT file!!!

seams that we are near to reach perfection... here the BETA3, I really hope to change it in OFFICIAL RELEASE after all the feedbacks recieved.

We remember that in some cases noises on CLK wires can do some problems, if ARGON don't boot try to reconnect, short or change the place of CLK. Here we solved by hardware a lot of possibles noise problems, but miss a MASS testing to see if we reach the target on 100%

This version is tested on 3 WII D2C2 in our laboratory and all works correctly, no more problems in the booting sequence.

Let's go to test the code so:

http://www.infectus.biz/downloads/Argon-Wasabus-D2C2-BETA3.rar
Notes: ERASE THE SPI FLASH BEFORE PROGRAMMING .BIN FILE, see world file instructions.

IMPORTANT! In some consoles we reported that the lens is able to read DVD+R more easy than DVD-R, this is reported with D2PRO too... so if don't works the game try another media type.

We remember that is very important the CLOCK wire in ARGON installation, on this post you will see how is the best installation. We invite all users that find the best solution in installation with a great result to post PICTURES that are very usefull for all ARGON users.
http://www.infectus.biz/forum/index.php?topic=2035.msg14284#msg14284

INFECTUS TEAM

[theforce81]

Thanks, flashing now

[idog]

In order to solve the noise problem, use a ground wire wrap around the clockwire.
See my other post in the beta2 topic.

[theforce81]

Idog, could you pls post a pic where you show the other point you connected it to?

[theforce81]

Still a dead drive when not connected to Injectus and having the program running!

CRAP AGAIN

[mrrib]

Thanks for the beta

I test it with 5 Wii´s D2C2 whitout a ground wire wrap around the clockwire and with DVD-R media.

They Work without any Problems.

[idog]

Idog, could you pls post a pic where you show the other point you connected it to?

Hope this one is clearer, see attachment.

[theforce81]

Thanks for the beta

I test it with 5 Wii´s D2C2 whitout a ground wire wrap around the clockwire and with DVD-R media.

They Work without any Problems.

In what order did you flash them exaclty? would be nice if you could tell it so that I am sure it is not my mistake

[brisk1234]

I tired new firmware on a D2C drive and D2C2 drive an they are both dead the D2C with BETA2 was working

[mrrib]

Thanks for the beta

I test it with 5 Wii´s D2C2 whitout a ground wire wrap around the clockwire and with DVD-R media.

They Work without any Problems.

In what order did you flash them exaclty? would be nice if you could tell it so that I am sure it is not my mistake

at first the .dat file, exit the InfectusProgrammer, start InfectusProgrammer, Flash Commands ---> erase ---> write the bin file.

[theforce81]

Idog, could you pls post a pic where you show the other point you connected it to?

Hope this one is clearer :

THANKS!

Still a nogo with whatever way of flashing, I will try this later today when I have my college stuff done, then I can cross this of the list as well!

[zen]

Is this release valid only for 250 or it works also for 125?

[brisk1234]

Just resoldered the clock wire on the D2C2 and it works perfectly straight away so if your drive is dead and only spins when connected with the programmer check the clock wire (fixed my problem)

[davide]

Is this release valid only for 250 or it works also for 125?

a3p250 only

[zen]

Is this release valid only for 250 or it works also for 125?

a3p250 only

will you release the ap125 version only when the beta becomes stable?