Infectus Modchip Forum

Welcome, Guest. Please login or register.
Infectus Modchip Forum > English > News Board > ARGON 9 WIRES FINAL VERSION 1.0 + INFECTUS BOOK
Pages: 1 2 3 [4]
« previous next »
Print
Author Topic: ARGON 9 WIRES FINAL VERSION 1.0 + INFECTUS BOOK  (Read 4275 times)
crackandhack
Newbie

Posts: 15
« Reply #45 on: May 11, 2008, 12:05:35 am »
one more day....
Logged
rockman18
Newbie

Posts: 7
« Reply #46 on: May 11, 2008, 02:09:38 am »
Quote from: crackandhack on May 11, 2008, 12:05:35 am
one more day....

And you, do you work on saturday and sunday ? and think when you wrote it was midnight in italy, so difficult to release at this hour 

Good Week-end infectus team, i'm waiting but i'm sure the release will be good.
I know you have a lot of work (new unmoddable D2C, compatibility with DMS, D2A, D2B, DVD update, etc...)  but take your time to release good and verified firmwares.
« Last Edit: May 11, 2008, 02:13:02 am by rockman18 » Logged
crackandhack
Newbie

Posts: 15
« Reply #47 on: May 11, 2008, 12:30:19 pm »
Quote from: rockman18 on May 11, 2008, 02:09:38 am
Quote from: crackandhack on May 11, 2008, 12:05:35 am
one more day....

And you, do you work on saturday and sunday ? and think when you wrote it was midnight in italy, so difficult to release at this hour 

Good Week-end infectus team, i'm waiting but i'm sure the release will be good.
I know you have a lot of work (new unmoddable D2C, compatibility with DMS, D2A, D2B, DVD update, etc...)  but take your time to release good and verified firmwares.

Yes I worked on saturday an sunday because if I say that day... the work will be finished that day and I life in Spain...   
Logged
larrylje
Sr. Member

Posts: 304
« Reply #48 on: May 11, 2008, 03:43:48 pm »
Quote from: crackandhack on May 11, 2008, 12:30:19 pm
Quote from: rockman18 on May 11, 2008, 02:09:38 am
Quote from: crackandhack on May 11, 2008, 12:05:35 am
one more day....

And you, do you work on saturday and sunday ? and think when you wrote it was midnight in italy, so difficult to release at this hour 

Good Week-end infectus team, i'm waiting but i'm sure the release will be good.
I know you have a lot of work (new unmoddable D2C, compatibility with DMS, D2A, D2B, DVD update, etc...)  but take your time to release good and verified firmwares.

Yes I worked on saturday an sunday because if I say that day... the work will be finished that day and I life in Spain...   

Here comes the inpatient users post again.

Sit in your chair and be a good boy till they release it.
Logged
headus
Newbie

Posts: 13
« Reply #49 on: May 12, 2008, 09:31:23 am »
today someone told me, that i have to solder the 13+4 way first to be able to get the wasabus firmware on it,and after it,i have to solder the normal 9 wire way?
Logged
jonko
Full Member

Posts: 185
« Reply #50 on: May 12, 2008, 09:47:01 am »
Quote from: headus on May 12, 2008, 09:31:23 am
today someone told me, that i have to solder the 13+4 way first to be able to get the wasabus firmware on it,and after it,i have to solder the normal 9 wire way?
No that bullshit.
You can even flash the chip without the wires ,outside the wii.
So just install the 9 wires mod and flash it.(when its available).
Logged
Don't drink and Mod.
DarkDJack
Newbie

Posts: 32
« Reply #51 on: May 13, 2008, 01:34:27 pm »
  Arff... My Injectus programmer don't See my SPI flash.... I can write the new firmware into Argon but after i don't see the Spi flash..

 I don't see "PMC PM25LV020" ... i see "UNKNOW"...




[IMG]


Anybody know something about that ?

Thanks
« Last Edit: May 13, 2008, 01:40:53 pm by DarkDJack » Logged
Cade
Newbie

Posts: 15


Wii addict
« Reply #52 on: May 13, 2008, 03:24:19 pm »
This is probably one of the reasons why Infectus took this firmware from the site. Wait till the next firmware will be released in where this problem probably will be solved.

I hope the new firmware will be released very soon. I soldered my Wii with the 9 wire Argon last weekend and it's waiting (all opened up) for the new firmware to test it with. I'm in doubt if I was better off using the 13 wire install instead.

Let's hope the new firmware will solve all problems once and for all otherwise team Infectus will fall to much behind the D2Pro team because they released a stable 9 wire firmware some time ago now and even have a new beta firmware released that has some great new features.
Logged
DarkDJack
Newbie

Posts: 32
« Reply #53 on: May 13, 2008, 04:29:38 pm »

 I hope too... i have 5 Wii and 11 Argon modchip who waiting the new code !   

   13 Wires is to long for me... i'm not a professional, 13wires is very long and difficult for me... I can do it but it's very long for a perfect work.

 9 Wires is so simple  

 I will waiting  :
Logged
honest_al
Newbie

Posts: 17


honest by name, honest by nature
« Reply #54 on: May 13, 2008, 11:26:55 pm »
well the wait is over for you guys, see main posts at top of threads, 1.1 is out and working.
Logged
(+[__]%), NDS, Wii, 360 & PS3 owner
Infectus
Global Moderator
Hero Member

Posts: 1675
« Reply #55 on: May 14, 2008, 08:39:02 am »
When you program a dat file, you need to disconnect and re-connect your injectus/infectus. Only in this way the programmer will find the new firmware and can manage the memory.
Logged
avivia55
Newbie

Posts: 2
« Reply #56 on: June 23, 2008, 08:07:23 am »
its not working !!!!!!!!!!!!!!!!!!
the programmer do not load the SPI.
i can flesh the chip for the wasabus but after that when i disconnect and reconnect the usb cable while the wii console still turned on, it cant detect the spi.
can someone from infectus team can give me answer for this?
 
Logged
Pages: 1 2 3 [4]
Print
« previous next »
 
Jump to:  

Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC
Triton design by Bloc