next »

[OscarHS]

Good news to all INFECTUS and ARGON users...

For infectus users there is finally online under TUTORIALS a nice "INFECTUS BOOK", over 100mb of tutorials to understand well how is possible to do with INFECTUS ! direct link here: http://www.infectus.biz/downloads/Infectus_and_Argon_Tutorial.zip

For ARGON SPI FLASH users finally is online the new firmware 9 wires !

INFECTUS TEAM - ARGON SPI - 9 WIRES FIRMWARE 1.0

IMPORTANT NOTE: The firmware WASABUS can be installed in ARGONSPI only if is FIRST installed on WII and during the upgrade process the WII is turned ON. This issue will be fixed in the next release to allow users to program ARGON SPI stand alone.

In this ZIP fill you will find these things:

1- INFECTUS PROGRAMMER, beta version to manage correctly ARGON SPI update
2- wasabus_argon.bin, this is the firwmare that is necessary to flash inside the SPI flash of ARGON
3- wasabus_a125argon.dat / wasabus_a250argon.dat, these are the new ACTEL firmware to support 9 wires installation

Please read "PROCEDURE TO PROGRAM ARGON SPI.DOC" for update your argon correctly to 9 wires.

WASABUS debug LEDS:

The LED on the ARGON will show you if modchip is correctly working or not, is very simple

LED OFF = Don't works
LED ON = Code injection procedure is complete

REGIONAL SETUP:
Current firmware is setup by default like PAL.

To setup the other region just shortcut the pads W and R in this way:

Both to GND = modchip OFF
W to GND = JAP
R to GND = USA

Note: injectus don't works anymore in this version like configurator with switches and leds, for a problem develope. We are working on that. If there are problems with modchip we suggest to don't connect injectus when modchip is working in the console.

KNOW ISSUES:
1- In few consoles we saw a deleay to recognize a new disk inserted, like 4/10 seconds before the disk spin... is it normal. we are working to fix this little problem

------
THANX FOR ALL
INFECTUS TEAM




Here the link for direct download:
http://www.infectus.biz/downloads/WASABUS-argon-1.0.rar

Feedback are welcome

INFECTUS TEAM

[Td]

Both links are the same.

Edit: Fixed now.

[Infectus]

I look if i can fix the links

Edit:  Fixed

[i420tom]

Tuturial link not working. WHen you click on the link on the tutorial page for argon infectus tutorials.  it leads you to argon firmware not to tutorials. Link there is broken too.

[DnD]

the link in this thread works !

[XmodsUK]

Do we have a final install diagram for Argon 9 wire?

[Chip33]

Hello

Work on D2B pinless ?

[Cade]

Cool! And sooner then expected to be honest... great work!

I'm looking forward to the first tests by other people, hopefully without problems. I can decide then if I will install my Argon with the 13 or 9 wires upcoming weekend.

Btw. there is no install diagram for this final 9 wire install included in the ZIP file, is it the same as for the beta?

[D@rio]

i am programming some argon, with new code 1.0 the infectus programmer doesn't recognise SPI flash, it writes UNKNOW (0000)

with beta version i have no problem

[theforce81]

I can't erase the flash, the infectus programmer hangs when I erase.... I had the BETA on it before though!

[oldschool]

Hi!

Could you PLEAAZZ stopping release doc-documents?
It´s really shit... PDF roxxx.

Thanx alot and really good work.
Love Infectus!


Rgds.

[DnD]

Hello

Work on D2B pinless ?

NO

[theforce81]

On a 1.8 chip update with the final one, I can't use the SPI erase as it is found as unkown. Two chips have this problem....

KK, reflashed the chips (both the original 1.8 one that was flashed to the final 9 wires first and the beta flashed that worked with SPI erase/write and didn't work with the final 9 wires in SPI erase/write) and with the beta the programmer sees the chip as PMC Pm25LV020, but when flashing it to the final, it doesn't recognise it (UNKOWN(0000)). When I flash the beta in again, it gets recognised as the PMC again, but after flashing it with th final again: still unkown. This is with two chips both factory equipped with SPI and the 250.

[pitod1]

Is there going to bee soon another firmware update for the Argon 17 wires?

[jurassic]

yea, hope to see some updates on the argon 17 wires