|
bunghoolio
|
|
« Reply #15 on: June 17, 2008, 02:40:46 pm » |
|
Very much better. Thanks.
No need to GND wrap CLK wire if your CLK wire is short enough and dosn't cross too many other wires. All happy again!!!
D2C2. Beta3
|
|
|
|
« Last Edit: June 17, 2008, 02:44:41 pm by bunghoolio »
|
Logged
|
|
|
|
OscarHS
Global Moderator
Full Member
Posts: 153
|
|
« Reply #16 on: June 17, 2008, 02:44:36 pm » |
|
Guys remember to check this! We remember that is very important the CLOCK wire in ARGON installation, on this post you will see how is the best installation. We invite all users that find the best solution in installation with a great result to post PICTURES that are very usefull for all ARGON users. http://www.infectus.biz/forum/index.php?topic=2035.msg14284#msg14284 |
OSCAR
INFECTUS SALES MANAGER
|
|
|
|
theforce81
|
|
« Reply #17 on: June 17, 2008, 02:48:24 pm » |
|
Just resoldered the clock wire on the D2C2 and it works perfectly straight away so if your drive is dead and only spins when connected with the programmer check the clock wire (fixed my problem)
Resoldered it on the Wii board or the Argon? THANKS AGAIN! |
|
|
|
|
|
mrrib
|
|
« Reply #18 on: June 17, 2008, 02:49:15 pm » |
|
Guys remember to check this! We remember that is very important the CLOCK wire in ARGON installation, on this post you will see how is the best installation. We invite all users that find the best solution in installation with a great result to post PICTURES that are very usefull for all ARGON users. http://www.infectus.biz/forum/index.php?topic=2035.msg14284#msg14284Its right, i have exactly done! |
|
|
|
|
|
brisk1234
|
|
« Reply #19 on: June 17, 2008, 02:54:09 pm » |
|
Just resoldered the clock wire on the D2C2 and it works perfectly straight away so if your drive is dead and only spins when connected with the programmer check the clock wire (fixed my problem)
Resoldered it on the Wii board or the Argon? THANKS AGAIN! Just did a new cable as short as possible to Argon and Wii not near other wires and it works |
|
|
|
|
|
brisk1234
|
|
« Reply #20 on: June 17, 2008, 02:59:06 pm » |
|
Ok after 10mins of testing i am still having eject issues and have to turn off then on to get the disc to spin up
|
|
|
|
|
|
quantronics
|
|
« Reply #21 on: June 17, 2008, 03:00:24 pm » |
|
Working great - will post a pic of install tomorrow
|
|
|
|
|
honest_al
Newbie
Posts: 15
honest by name, honest by nature
|
|
« Reply #22 on: June 17, 2008, 03:17:29 pm » |
|
great news, i will try this later.
thanks Oscar and crew
|
(+[__]%), NDS, Wii, 360 & PS3 owner
|
|
|
|
Jadgamez
|
|
« Reply #23 on: June 17, 2008, 03:51:22 pm » |
|
D2C2 now working
D2C2 now working
OK, tested many times now and I am still getting problems with the drive locking up when I want to insert a disc. From power down it works great. From the disc channel I can eject the disc but sometimes cannot re-insert it lets say 3 out of 5. If it takes the disc then it will boot despite it flashing “insert disc” a few times before it starts to spin. If it doesn’t take the disc then I leave it a bit inserted then power down it will then take the disc in and then boot. I have to say this a very big improvement and nearly 100% but not just there yet I think you need a beta4
I have tested the clock wire in many different locations e.g very short, very long, shielded, unshielded etc and it doesn't seem to make much difference to the drive locking up issue. However it will boot backups once the disc is accepted and the dive spins every time
Here is a pic of my install:
|
|
|
|
|
OscarHS
Global Moderator
Full Member
Posts: 153
|
|
« Reply #24 on: June 17, 2008, 03:56:27 pm » |
|
Pls. check the FIRST post of this thread, we updated the .DAT file... this new one support correctly D2C boards.
we need feedbacks too on this board, so pls. post results expecially of old BUGS like EJECT etc reported in the old 9 wires firmware
BYE
OSCAR
|
OSCAR
INFECTUS SALES MANAGER
|
|
|
|
Jadgamez
|
|
« Reply #25 on: June 17, 2008, 04:06:07 pm » |
|
Just to add sometimes you can be on the disc channel and insert a disc then the machine says “insert disc” and nothing happens until you press the eject button then the drive will power up and boot the game. If you press eject again the disc will eject.
|
|
|
|
|
LordX
Newbie
Posts: 26
ModChip.co.il
|
|
« Reply #26 on: June 17, 2008, 04:21:16 pm » |
|
How about Actel 125 I have ALOT chips here , all of them are 125 and not 250 Please compile BETA3 to 125 version ! Pls. check the FIRST post of this thread, we updated the .DAT file... this new one support correctly D2C boards.
we need feedbacks too on this board, so pls. post results expecially of old BUGS like EJECT etc reported in the old 9 wires firmware
BYE
OSCAR
No problem , give me 125 BETA3 code I will test it . |
|
|
|
« Last Edit: June 17, 2008, 04:28:46 pm by LordX »
|
Logged
|
|
|
|
|
pasadeotros
|
|
« Reply #27 on: June 17, 2008, 04:39:15 pm » |
|
When will be ready a version for infectus 1/2?
|
|
|
|
|
|
Jadgamez
|
|
« Reply #28 on: June 17, 2008, 04:55:56 pm » |
|
OK, very strange now. I got bored so I closed the wii up completely. It now works 100% , NO DRIVE LOCK, NO EJECT PROBLEM, 100% BOOTUP EVERY TIME on originals and backup (I haven’t got SSBB). I have been testing now for well over 1 hour and no matter what I do it just works. Is this a good thing or bad thing or a one off? I need to get some more wii’s to test now.
|
|
|
|
|
|
theforce81
|
|
« Reply #29 on: June 17, 2008, 05:01:37 pm » |
|
At this moment with Idogs his shielding solution it works nicely! So this is an improvement! Mario galaxy played a few lvl's and saved, went back to teh Wii menu, ejected and all, with the D2C_D2C2 Firmware version.
|
|
|
|
|
|