next »

[Infectus]

Fixed all the problems about compatibility.

Please give us some feedback.

Step 1:  Open your actel panel, load WASABUSxxx.DAT  (xxx=a3p125 or not) and press program.
Step 2: Restart the programmer.
Step 3: In menu,  Flash commands ,  erase and write bank0 with WASABI.BIN

[doppertje]

Great work,

I don't have infectus here but i do have a bunch of argon chip ready to be flashed with wasabus hope the release will follow shortly.

keep up the good work

[BlaXioN]

Hello,

I have both models (60/125) here.
Will now installed and report.

Greeting
BlaXioN

[theforce81]

Thanks for the update, I am anxious to get to know the outcome!

[krayziexploiter]

just tried it (060). Dead drive. Made the clock wire longer and the drive started spinning. Now it doesn't do anything again. I will play with it some more tomorow or saturday.

[BlaXioN]

Have the chip brazed 060.
The drive does not Noise more.
I can not insert a dvd

[theforce81]

No flame, just the truth as the OP is telling us all problems with incompatability have been solved with this version:
Sad to hear that Infectus hasn't gone up even one step from the latest version.... Please ppl from Infectus, don't make false statements to get hopes up from customers.

Thanks

[Infectus]

Download http://www.infectus.biz/downloads/Wasabus1.2.zip  and use the new schematic.

Now some question:
- Have you programmed the flash with wasabi.bin ?
- Is the blu led turned on?
- Are you using the correct U pad?

If the blue led is off, check your installation.
If the blue led is on but not work, check the switch for the correct country.

[theforce81]

Ahhh, I might have jumped the gun with my remark, check the clk (U) wire! I had to switch back and forth 5 times until I noticed the difference.
It just got placed one point to the right ppl! I hope this is it!

[Wii fanboy]

Download http://www.infectus.biz/downloads/Wasabus1.2.zip  and use the new schematic.

Now some question:
- Have you programmed the flash with wasabi.bin ?
- Is the blu led turned on?
- Are you using the correct U pad?

If the blue led is off, check your installation.
If the blue led is on but not work, check the switch for the correct country.

Infectus2 A3P060
WASABUS 1.2
Schematic v1.0 17/04/08
PAL D2C D1A
Dip1 off, Dip2 off
U Pad is correct

Green led
No blue led

Drive dosen't eat or eject the dvd and dosen't work at all.

I have installed 200+ Infectus2 with WIIKTUS fw and im sure that it's installed correct.

[origa]

Have you programmed the flash with "wasabus.bin" ??

Byee

[Wii fanboy]

Have you programmed the flash with "wasabus.bin" ??

Byee

No, Wasabus.dat 

I'll try Wasabus.bin in the next install. I change the first to an WIIKTUS install, because it did'nt work with Wasabus.dat

[Infectus]

- Wasabus.dat is for actel
- Wasabi.bin is for the flash


Step 1:  Open your actel panel, load wasabusxxx.dat  (xxx=a3p125 or not) and press program.
Step 2: Close the actel panel and restart the programmer.
Step 3: In menu,  Flash commands ,  erase and write with wasabi.bin

[Wii fanboy]

- Wasabus.dat is for actel
- Wasabi.bin is for the flash


Step 1:  Open your actel panel, load wasabusxxx.dat  (xxx=a3p125 or not) and press program.
Step 2: Close the actel panel and restart the programmer.
Step 3: In menu,  Flash commands ,  erase and write with wasabi.bin

Infectus2 A3P060
WASABUS 1.2 .dat
WASABUS.bin
Schematic v1.0 17/04/08
PAL D2C D1A
Dip1 off, Dip2 off
U Pad is correct

Green led on
Blue led on

It now works with all testet games ! (original + backup + GC homebrew)




Sometimes I experienced a delay before the drive / and blue led gets active, when I turned on the Wii.
One time up to 10 seconds, but normal 0-4 seconds.

[bd816]

Step 3: In menu,  Flash commands ,  erase and write with wasabi.bin

When I choose the write with wasabi.bin it gives the option
Bank 0 (00000h)
Bank 1 (40000h)
Custom

This is for the USA

Which option should I choose