Infectus
Global Moderator
Hero Member
Posts: 1660
|
|
« Reply #15 on: April 18, 2008, 04:29:35 pm » |
|
Bank0
|
|
|
|
|
|
pasadeotros
|
|
« Reply #16 on: April 18, 2008, 04:57:02 pm » |
|
Hi. maybe this can help. I load and program wasabus.dat in 10 infectus 2. but i don´t load wasaby.bin at the flash. This morning i see, and when i open the program again and try to write the flash, screen of error appears.
Only when i wrote one chip again, write flash option work fine.
PD. Sorry for my very very bad english. Here from spain.
|
|
|
|
|
Infectus
Global Moderator
Hero Member
Posts: 1660
|
|
« Reply #17 on: April 18, 2008, 05:01:36 pm » |
|
Read what i wrote.... after programming the dat, before to program the flash, restart the programmer. Otherwise the flash is not recognized.
|
|
|
|
|
|
krayziexploiter
|
|
« Reply #18 on: April 18, 2008, 09:44:32 pm » |
|
Nice. Noticed the new U point. Gonna try it tomorrow. When are you going to work on the d2b/d2a/dms support?
|
|
|
|
|
|
Psycho007
|
|
« Reply #19 on: April 18, 2008, 11:09:35 pm » |
|
First
INFECTUS AM STILL #1 - SO WHY TRY HARDER
Ok my test
Pal LEH146 D2C/D1
Infectus2 125 wasabus 1.2 Actel and wasabi in flash bank 1 both bank to OFF
Blue LED goes out when insert a disk and disk dont spin.
most times it get blue agen after 3 - 10 sec. and boot game, some time it stays off and need to turn WII OFF and ON.
Cant use eject when Blue LED is off and it dont help to reset, only OFF and ON will work.
Test game
Backup: DVD-R Verbatim
Mario Galaxy - PAL - OK
Ice Age 2 - PAL - OK
GCOS - - OK
Backup: DVD+R Verbatim
NFS Carbon - PAL - OK
Original:
Wii sport - PAL - OK
|
|
|
|
|
|
cryogenic
|
|
« Reply #20 on: April 19, 2008, 12:43:27 am » |
|
Pal wii 3.1e
infectus 2 a3p060
flashed infectus 2 first time ok
installed in wii switch on and working
boots backup pal / us-ntsc / gc pal 100% so far
will stick it back together and let the kids test it tomorrow
thanks guys
|
|
|
|
|
|
Td
|
|
« Reply #21 on: April 19, 2008, 06:55:09 am » |
|
Good news this time!
Converted my 14 wire install to the 9 Wire install, flashed the new wasabus to my Infectus1 A3P060, the wasabi.bin, and set I and G to ground (USA). It's booting every disc I've thrown at it so far.. Booting faster than the regular Wiiktus firmware, too! GameCube games show up immediately after inserting them.
One problem it's still having is it can take up to 45 seconds for the drive to start up after turning on the Wii. Sometimes it's instant, sometimes it takes 30-45 sec.
Everything seems to be working fine besides that. I haven't tried a PAL or out of region game yet. Don't think I even have any, but all my NTSC Backups and Originals (GameCube and Wii) are working great.
One thing I noticed: The drive seems to be running slower/quieter than with the original drivecode or Wiiktus modified drive code. Is this Wasabi.bin set to decrease the normal read speed? Maybe it's all in my head.
|
|
|
|
|
|
krayziexploiter
|
|
« Reply #22 on: April 19, 2008, 08:36:13 am » |
|
One problem it's still having is it can take up to 45 seconds for the drive to start up after turning on the Wii. Sometimes it's instant, sometimes it takes 30-45 sec.
Sounds like the sync problem. did you try making the clock wire longer like with wasabi? |
|
|
|
|
|
cryogenic
|
|
« Reply #23 on: April 19, 2008, 10:13:40 am » |
|
One problem it's still having is it can take up to 45 seconds for the drive to start up after turning on the Wii. Sometimes it's instant, sometimes it takes 30-45 sec.
Sounds like the sync problem. did you try making the clock wire longer like with wasabi? Not had any drive delay probs yet on mine, the clock wire is about 1.5 inch along. |
|
|
|
|
|
krayziexploiter
|
|
« Reply #24 on: April 19, 2008, 11:51:58 am » |
|
like on wasabi this should only affect a small percentage of wii consoles
|
|
|
|
|
|
pasadeotros
|
|
« Reply #25 on: April 19, 2008, 12:55:34 pm » |
|
Installed a3P125 in pal console. Programmed wasabus12_a3p125.dat, and then close window. in flash commands wrote, wasabi.bin.
Perfect installed. wire to point "u" its about 15cm long.
Original game "super mario galaxy" load... and... black window... saying... an error occurs while load game... pls shutdown the wii
backups do not work.
|
|
|
|
|
|
Xenobius
|
|
« Reply #26 on: April 19, 2008, 06:21:24 pm » |
|
Hi all,
I have an Infectus1 and I would like to try this firmware on it.
Can anyone please tell me if I need to short any points on infectus1 so I mimic the 2 switches? Its for a Pal. Both switches off.
Also just to confirm, I need to put the dat file and the bin file right? They can be done before installing it right?
Thanks all
|
What oes around .. Comes around
|
|
|
Berny_AB
Newbie
Posts: 30
Argonaut
|
|
« Reply #27 on: April 20, 2008, 01:14:02 am » |
|
Wasabus and Wiiktus Firmwares have different Pinouts!!!
|
Berny_AB
|
|
|
|
krayziexploiter
|
|
« Reply #28 on: April 20, 2008, 07:03:12 am » |
|
Hi all,
I have an Infectus1 and I would like to try this firmware on it.
Can anyone please tell me if I need to short any points on infectus1 so I mimic the 2 switches? Its for a Pal. Both switches off.
Also just to confirm, I need to put the dat file and the bin file right? They can be done before installing it right?
Thanks all
for pal don't bridge any points, and yes you can flash the dat/bin before installing |
|
|
|
|
|
Cpasjuste
|
|
« Reply #29 on: April 20, 2008, 01:09:24 pm » |
|
I would prefer to solder alternates points instead of the 3 pins points like the Aragon alternate diagram.
Could someone provide the alternate P, Q and T points ?
|
|
|
|
|
|