next »

[larrylje]

The Infectus 1/2 firmware is built in.

Choose the appropriate firmware in Actel Firmware pulldown menu.

[mombi]

Do you have News on wii-user's problem? I have the same problem, too!

[demmin]

Hello oscar i reported a problem, updating failed.



Updating error
My Injectus reporting now :   Unknow Device (0x0FFFFFFF)  Board: Injectus 0000

SPI Programmer Loader V0.2 UNKNOWN 0000

I'm having the same problem as well.

[Infectus]

Have you the problem also before the update or haven't you try this?

[Psycho007]

Dear Customers,


7- ERROR 65 reported on BENQ "trial firmware" application is now fixed.

BYE FOR NOW
INFECTUS TEAM

Sorry but there is still no Trial firmware for infectus2 and benq

Only same firmware in all bank else it will be E65 when infectus is on.

Bank 1 on and E65
Bank 2 on and it will use the original in the drive.

[bushing]

Warning: Do not use this software if you want to use the NAND programmer feature -- it's apparently broken in 0.0.3.9, and once you install this version, you can't go back and try an older version to fix the problem.

[bushing]

Here's some more info, which may or may not help troubleshoot the problem:
When I select "NAND programmer" or "Dual nand programmer" and click update, I get:

ActID = 129121cf
ExpID = 029121cf
Initializing Target Device...
Setting BSR Configurations...
Reading Security...

[hang]

At that point, all of the other firmware proceed to "Performing Data Authentication", but mine never makes it that far with the NAND programmers.  Please help!

[TheExpertNoob]

Warning: Do not use this software if you want to use the NAND programmer feature -- it's apparently broken in 0.0.3.9, and once you install this version, you can't go back and try an older version to fix the problem.

I switched to Postbus Addon and was able to use the NAND options from there (read. write. erase) try that. But is seems that iDGTool dosent work with the new USB update to downgrade the 360. I have started a bug reporting topic in the Tech Support Thread.

[TheExpertNoob]

...and when will this be fixed?

[bushing]

...and when will this be fixed?

(*crickets*)

[vgplayer]

Warning: Do not use this software if you want to use the NAND programmer feature -- it's apparently broken in 0.0.3.9, and once you install this version, you can't go back and try an older version to fix the problem.

I switched to Postbus Addon and was able to use the NAND options from there (read. write. erase) try that. But is seems that iDGTool dosent work with the new USB update to downgrade the 360. I have started a bug reporting topic in the Tech Support Thread.

Thanks that worked to access the NAND to fix my bad flash 360.