next »

[skastro]

I thought it was necessary to have the wii turned on during a firmware update to power the chip. It isn't? I don't have my injectus yet.

Yes, you have to power on your wii or you'll get a wrong ID and you wont be able to update. You can also program argon when is not soldered to wii without additional power.

[argonwii]

I thought it was necessary to have the wii turned on during a firmware update to power the chip. It isn't? I don't have my injectus yet.

Yeah you need to have the Wii powered on to update the firmware.

[larrylje]

When I said to unplug the Wii when doing an update I meant to unplug it when connecting the programmer to the Flat Cable. This will protect from a possible short during the connection of the programmer. Once you have the programmer connected to the Flat Cable then plug the Wii in and turn it on. Then connect programmer to PC via USB.

I am sure allot of users do not practice this but there has been a few threads on other forums that state that they shorted the programmer/Modchip when connecting the programmer to Flat Cable.

@Wimper

Have you tried unplugging the Wii and taking out the battery as well for a while. Then insert the battery and see if the Wii will come on then?

[Transient]

Gamecube game 'Dance Dance Revolution Mario Mix' USA version now boots on Argon 1.6, however it still locks up with a black screen after trying to start playing.

Wasn't working at all before on 1.4 (black screen on boot).

Hopefully a future release will fix this!

[scenekid]

When I said to unplug the Wii when doing an update I meant to unplug it when connecting the programmer to the Flat Cable. This will protect from a possible short during the connection of the programmer. Once you have the programmer connected to the Flat Cable then plug the Wii in and turn it on. Then connect programmer to PC via USB.

I am sure allot of users do not practice this but there has been a few threads on other forums that state that they shorted the programmer/Modchip when connecting the programmer to Flat Cable.

@Wimper

Have you tried unplugging the Wii and taking out the battery as well for a while. Then insert the battery and see if the Wii will come on then?

I was thinking about keeping the Injectus attached ribbon cable, then double sticky sided tape mount it to back of my wii, so you don't recommend keeping it attached?

[chricke]

I got my Argon 1.6 Firmware with DS2C and had 1.4 from begining then I did update to 1.6 today and now I cant play SSBB either versions not even then singel layer disk What did I do wrong? PLEASE HELP ME : ) my other games which is burned works FINE!

Dears chricke.