|
Console Hardware
|
|
« Reply #15 on: January 22, 2008, 08:06:31 pm » |
|
I installed the extra wires on a PAL wii today with 1.2 firmware. Still all works fine. Now just wait for the 1.3 to be released.
@sattommy, yes that's right. No need for the extra wires if you patch you iso's.
If regionfrii has the same results as the new firmware and 4 wires, why do sooooo many whine about the Argon's region compatibility? As sattommy said, it takes a few seconds to patch the iso. For a sec, I thought I was missing something Nah you're right, they're just whining.. |
- Reseller for Infectus modchips- |
|
|
|
Pinion
|
|
« Reply #16 on: January 23, 2008, 09:17:50 am » |
|
This has nothing to do with gamecube compatibility or any other future functions correct? I mean unless you want to play gc games from other regions.
|
|
|
|
|
|
Erwin
|
|
« Reply #17 on: January 26, 2008, 12:20:29 pm » |
|
Hi
i just installed a argon modchip into my wii using the beta diagram including the 4 wires
at first had a problem (no disc could be read) because point A was not connected correctly so fixed that and checked all the others witch turned out to be ok.
my wii now can read originals but no backups (DVD-R,DVD+R using booktype DVD-ROM.
so my question is do i have an old firmware or do i need to check my sodering again?
|
|
|
|
|
|
Console Hardware
|
|
« Reply #18 on: January 27, 2008, 04:01:55 pm » |
|
Hi
i just installed a argon modchip into my wii using the beta diagram including the 4 wires
at first had a problem (no disc could be read) because point A was not connected correctly so fixed that and checked all the others witch turned out to be ok.
my wii now can read originals but no backups (DVD-R,DVD+R using booktype DVD-ROM.
so my question is do i have an old firmware or do i need to check my sodering again?
Check your soldering and burn on good media like Verbatim. |
- Reseller for Infectus modchips- |
|
|
BOXXDR
Jr. Member
Posts: 57
The BoXX Doctor www.boxxdr.com
|
|
« Reply #19 on: January 28, 2008, 07:09:06 am » |
|
I made my own diagram using all vias. I posted it else where here but i think more people would see it here. You need a fibreglass brush to prepare all the vias first! HIGH RES VERSION > http://www.boxxdr.com/ARGON_INSTALL.JPGLOW RES VERSION \/ INSTALL PIC SHOWING WIRES ONLY> http://www.boxxdr.com/ARGON_WIRES.JPG |
|
|
|
|
|
TurboTronix
|
|
« Reply #20 on: January 31, 2008, 04:56:44 pm » |
|
When will the diagram for the Infectus chip be released (including these 4 extra wires)? I am just about to install mine and I don't want to have to reopen the WII again in the future in order to solder these 4 wires...
|
|
|
|
|
Arakon
Global Moderator
Sr. Member
Posts: 454
|
|
« Reply #21 on: January 31, 2008, 06:52:15 pm » |
|
There will be no diagram till the software is finished.
|
No tech support by PM or email! Ask questions ONLY in the forums, so everyone can benefit from the solutions and discussions.
|
|
|
|
mp3boy
|
|
« Reply #22 on: February 03, 2008, 02:19:24 pm » |
|
Why can't they work out which points will be used then release a diagram? Surely it will be similar to the Argon.
At least then we could install the chips with the 4 extra wires ready to accept the update when it's available.
|
|
|
|
|
|
Xenobius
|
|
« Reply #23 on: February 03, 2008, 09:59:34 pm » |
|
Why can't they work out which points will be used then release a diagram? Surely it will be similar to the Argon.
At least then we could install the chips with the 4 extra wires ready to accept the update when it's available.
Im with you !!! its not the update that bothers me.. its the diagram!!! its holding up soo much work.. |
What oes around .. Comes around
|
|
|
|
cmyhack
|
|
« Reply #24 on: February 03, 2008, 10:28:03 pm » |
|
C'mon guys..u can't write a connection diagram before creating the firmware!
..have a little patience..it takes 15 minutes to solder 4 (or whatever) additional wires..don't stress the team so much!!
|
Determined to Dominate Everything..WE ARE THE FIRE!!
|
|
|
Infectus
Global Moderator
Hero Member
Posts: 1458
|
|
« Reply #25 on: February 04, 2008, 10:02:35 am » |
|
The mainboard point are the same of argon. The pad on infectus are not know (for public) at the moment.
|
|
|
|
|
|
del3165
|
|
« Reply #26 on: February 11, 2008, 06:55:37 pm » |
|
installed 4 extra wires and I get disk error removed 4 wires now ok. running 1.4.
Any ideas
Derek
|
|
|
|
|
|
krayziexploiter
|
|
« Reply #27 on: February 11, 2008, 07:02:59 pm » |
|
which points did you use. The picture has a mistake in them. Be sure to use the wiiktus points and ignore the bottom.
|
|
|
|
|
|
del3165
|
|
« Reply #28 on: February 11, 2008, 07:07:32 pm » |
|
P Q O and V for Pal.
Where is the error in the diagram
Derek
|
|
|
|
« Last Edit: February 11, 2008, 07:11:27 pm by del3165 »
|
Logged
|
|
|
|
|
krayziexploiter
|
|
« Reply #29 on: February 11, 2008, 07:15:55 pm » |
|
Sorry I was wrong. I thought this was the wiiktus topic. The points are good. I dunnow hat's wrong. It's working fine here. Probably some connection failure somewhere
|
|
|
|
|
|