next »

[Arakon]

that sounds more like a read error due to bad media or a bad rip.

[larrylje]

that sounds more like a read error due to bad media or a bad rip.

On my NTSC (USA) Super Mario Sunshine it gives a disc read error at the end of the Intro when the Professor ask Mario to get some assistance.

If I boot the same Game Disc with GCOS it will pass that part without giving the Read Error.

So it is not an issue with a bad burn.

[skastro]

For people who want to run 480p mode for GC games and get a green screen.
On GCOS select NTSC mode (Y) and after that press B, and the game will ask you if you want to use progressive.

[skastro]

Zelda Wind Waker NTSC doesn't boot on my PAL Wii. I Get green screen on any GCOS video mode.

It plays on yaosm.

[larrylje]

Zelda Wind Waker NTSC doesn't boot on my PAL Wii. I Get green screen on any GCOS video mode.

It plays on yaosm.

Did you try all video modes in GCOS? Try booting it with PAL 60mhz.

[skastro]

Zelda Wind Waker NTSC doesn't boot on my PAL Wii. I Get green screen on any GCOS video mode.

It plays on yaosm.

Did you try all video modes in GCOS? Try booting it with PAL 60mhz.

Yes, I have tried all video modes. All my NTSC games only work on NTSC video mode (Y)

[renfolly]

Very good time infectus. The forum was more calm after 1.7b. Only praise and reports that this all working. Congratulations.

[h11l]

some1 in this topic said Fire Emblem Path of Radiance is workin, but its not workin.
wheneva it asks me to choose 60 Hz or 50Hz after i  chooses one of them it freezes ( i tried both of them). Just wanna correct a mistake. And when yu test game plz make sure yu play it for little bit so yu can see whether there r any errors or not. And yeah cud some1 tell me what a GCOS is. Im really confused

[larrylje]

some1 in this topic said Fire Emblem Path of Radiance is workin, but its not workin.
wheneva it asks me to choose 60 Hz or 50Hz after i  chooses one of them it freezes ( i tried both of them). Just wanna correct a mistake. And when yu test game plz make sure yu play it for little bit so yu can see whether there r any errors or not. And yeah cud some1 tell me what a GCOS is. Im really confused

I said Fire Emblem Path of Radiance is working. If you would take the time and read the complete post you would have read that I have a NTSC(U) Wii with a USA game of it.  I will get different outcomes on games then you since you have a PAL Wii.

So before you open your mouth and claim someone is wrong make sure you yourself know what your talking about. Even if it was a PAL game on a PAL Wii it doesn't necessarily mean I would be wrong or anyone else is. Maybe your doing something wrong or have a bad rip of the game. It isn't like your the king of testing and if something doesn't boot then 100% it is not working.

A better way of going about this would have been to find out who claimed it was working and ask them how they booted it. Instead of telling them they are wrong and telling them how to test a game.

GCOS is a homebrew game booter (Game Cube Operating System) which has also been adapted for Wii to boot Game Cube Games.

[brk1]

I'm new to this and have just updated from 1.4 >>> 1.6 >>>> 1.7 beta using Pal console with the 125 chip .
Short results so far using Original ,backups ,backup GCube straight images
1.4
Originals - Yes
B/Ups    - Yes
GCube   - No

1.6
Originals - Yes
Backups - Yes
GCube    Pikmin -Yes
            Pikmin 2 - No

1.7
Originals  - Yes
B/Ups     - Yes
GCube    - Pikmin  - yes
               Pikmin 2 - Yes

So whatever you guys are doing , your going in the right direction 

[skastro]

PAL Wii

PAL Games:
Luigis Mansion - Works
Batallion wars - Works


NTSC Games
Mario Sunshine - Works
Pikmin - Works
Pikmin 2 - Works
Mario Golf - Works
Mario Tennis - Works
Battle Stadium DON - Works
Viewtiful Joe - Works
Viewtiful Joe 2 - Works
Mario Kart - Works
Smash Bros Melee - Works
Mario Strikers - Works
Mario Baseball - Works
Ikaruga - Freeze after selecting 'Start Game'
Zelda Collectors Edition - Freeze after selecting any of the games
Zelda WindWaker - Green Screen

These 3 games work on yaosm. I tried using GCOS

[yorkz]

Any idea when you planning on releasing a 1.8 final?

Just looking for an indicator of days or weeks.

[uncklock]

If you working on FW 1.8F ,

Fix the problem, that the programmer must unpluged for 100% funkction,please

For Example: If i want to Play EA Playground on my Pal Wii LEH165 with Dc2 D1A
                  and programmer was plugged, the disk don´t can be read, everytime
                  blackscreen.
                  With unplugged Programmer no Problems, the Game starts direkt !!

In the German Forum on Gulli Board a few more have the same mistake with a few
other Games, too.

With best Regards

[Infectus]

Any idea when you planning on releasing a 1.8 final?
Just looking for an indicator of days or weeks.

Your first post is a good joke!

[idog]

Any idea when you planning on releasing a 1.8 final?
Just looking for an indicator of days or weeks.

Your first post is a good joke!

Nevertheless, an estimate to when a final version of the 1.7b will be available would be nice. You don't have to go mock around everybody just because they want a stable working version without problems. (first installs of D2Pro are appearing on the web now, not a single problem mentioned with that chip.. customers are getting curious as to why there are still some problems with the Argon fw..).

edit : And as Oscar requested... I'm more than happy to 'stay with you', but when you're starting to laugh at people for wanting some reassurance, it's getting hard not to order just a few D2Pro's for comparison..