Remove the glue  from SST flash on driver to allow installation of infectus flat.

Put some pond on the infectus flat cable pads, side of flash sst. like the picture

Put the flat on the SST FLASH like the picture and solder the pads on the SST. Connect the last 2 wires.

The infectus flat cable came out from driver from the POWER connector port, like the picture

Fix the modchip on the driver with a adesive tape like the picture, and connect the last 3 wires

HITACHI FLAT CABLE TUTORIAL

The infectus flat cable is provided with 1 mt long branch wire 0.08mm isolated.
This wire is necessary to connect the flat cable to the pins of the flash. The isolated branch cable are isolated, so no short circuits, only where you put the pond are contuctors.

To show how install the flat cable we did a nice HIGH QUALITY video that show the procedure. You can see the YOUTUBE version or you can download the BEST QUALITY VERSION here: Hithaciflatchip.zip (12Mb), oppure potete visionare lo stesso video tramite YOU TUBE qui sotto.

Here the HIGH RESOLUTION picture of the flat installed.

Here you can see the INFECTUS installed outside the DVD DRIVER.

PS: to allow the flat cable to exit correctly from the DRIVE,  is necessary to cut a side of the dvd driver cabinet... watch the video to understand where and how.

Tutorial made from technical staff of RSM TRADE (www.hardstore.com)