DUAL KERNEL USING THE INFECTUS 2 CHIP

For who want use the linux without lose the possibility of playing with 360 , this is the tutorial for mounting a double NAND. If use a HD for save and for XBOX-LIVE Addons , remember that if installing LINUX the HD cant be used for this. Must be have 2 hd for this.
I would remember you that this modding invalid the Guarantee of the console and the steps that followd it must do if we have a good Working Knowledge with eletronic cards

The materials need is followed :

- One console with Kernel less or same at the 4532
- NAND HY27US08281A that we can take on console damaged or on the web on the On-Line store
- The Chip Infectus 2 that we can buy on own sponsor Hardstore and the relative programmer that we can download on official Infectus Website on the download section: CLICK
- A Diverter at 2 ways
- One resistance at 10.000 ohm

First we must do a backup of the NAND

- If we have a lower Kernel o same at the 4532 we must following this tutorial : CLICK
- If have a lower Kernel or top at the 4532 we must follow this tutorial : CLICK

One that we have downgrade we can flash on the nand addictional.

For flashing the nand mounted on the Motherboard of the XBOX360 damaged follow the instruction on the tutorial up linked , while for do on the original nand we must connect it with the INFECTUS 2 the point marked in red in this picture : must connect the power at the +5v on the point marked on the red and the power at thte 3.3v marked in the green directly on the addictional NAND

Following the datasheet of the NAND connect the point at the chip Infectus , at the working end the result is this :

Now we must programming the new NAND. Installing the Programmer , if is required to update the chip allow it :

One is finish go to "Actel Firmware\NAND PROGRAMMER"

How we can see the windows change , return to "Actel Firmware\NAND PROGRAMMER" click on the command UPDATE and attend the finish of the programmation of the chip :

One the programmation is finish follow this steps :

- remove the USB that connect the chip at the PC for do a little reset

- close and reset the Programmer

- reconnect the USB and connect the chip at the PC


Now for write on the NAND go the Flash Commands and launch a option called ERASE that during few seconds :

Without touch nothing return on the Flash Commands and lounch option "Write":

Go to selecting the own file backup of the NAND that we have saved on the first :

Waiting that the program finish to write the NAND on own console :

Now we have the Flashed NAND we must decide to position on own xbox360

The addictional nand must be installed in two method :

- the first is with classic installation with wire :

For installation the wire the point of interest are this :

This point must be connect at the point Correspondents on the Addictional nand escluding CE and CE1

- the second ( beautiful but hard) is the method called sandwich , for do this we must do Gently fold the feet of the nand at 90° Degrees

If chose the sandwich use the pond point for point raising the CE of the NAND top and cut always the tracks marked below :

The point marked in red in this pictur below can be ignored because this feet not be connected

After we have cut the tracks and Scratched connect the parts Scratched at the central pin of the Diverter

Connect the head of the resistance at 10.000 ohm in this method :

Others hed must be connect to CE of the Addictional NAND and at the branch of the Diverter
Now connect the CE1 of the nand on board of the others beanch of the Diverter
The scheme is this :