next »

[tutuli]

Hello

I have used the Infectus Programmer (ver. 3.9.4.4) to programm my argon (a3p250 + spi).
First i tried wasabus 1.1 and programming (FPGA + Flash) was successfull, blue led on argon is on. Because i ave a d2c2 board i tried the beta2 which don't work.

Now my problem is that i cant flash anymore. everytime i get an error "Write error at 0x00000000" when i try wasabus 1.1 and "write error at 0x0001a500" for beta2 / beta2.5.

It only works wihout "write varify" but i think it isn't successfull because no led is on when i try wasabus 1.1 (before it was on!)

my argon is installed when i'm programming but i tried it also without installation (only programmer connected) -> same result.

what happened to my argon / programmer / flash ?
Programming the fpga works fine (i think), only the flash prog. goes wrong.
can somebody help?

some screens:

wasabus 1.1:


d2c2/d2c wasabus beta2 / beta2.5:

[Td]

Have you tried erasing before writing?

Also, make sure you're using the Infectus Programmer that's included in the Beta 2.5 zip file.

[tutuli]

I erase it every time before programming. It takes about a half second (is that ok?). But the blank check isnt successfull (error on adress 00000000).

I use the programmer thats included in beta 2.5.

im wondering because everything worked fine when i tried it first. There is no short on my board. The programmer recognizes the flash correctly, but programming failed every time.

[tutuli]

no ideas?
is it possible that my spi flash is faulty?
or is it a programmer issue?

[KAISER TECHNOLOGIE]

no ideas?
is it possible that my spi flash is faulty?
or is it a programmer issue?

same problem here.... annoying

EDIT : WORKING OK WHEN DESACTIVATE "WRITE VERIFY" IN "SETTING" PANEL !!!

[tutuli]

no ideas?
is it possible that my spi flash is faulty?
or is it a programmer issue?

same problem here.... annoying

EDIT : WORKING OK WHEN DESACTIVATE "WRITE VERIFY" IN "SETTING" PANEL !!!

i tried this before and the programmnig was "successfull" but i'm not sure if the programing was realy successfull (cant test it because i have d2c2 - waiting for working beta)

your wii  works with "that"?

[tutuli]

ok I ordered some pm25lv020 an i will replace it.
i hope only the spi flash is faulty (after 1 time programming )